In the last post on training Maggie to milk, a reader asked for more details on how I hobble her back leg to avoid getting kicked. This morning I took the camera with me to the barn and got some general pix of the milking process.
I have a permanent loop on the hobble rope. This way I can slip the rope through the loop, then around Maggie's leg. This means the hobble stays loose enough on her leg not to be uncomfortable, but if she pulls at it, it tightens.
I thread the other end of the rope through the eye-bolt on the post and make a slip knot. That way, if I have to release her leg quickly, I just yank the tail of the rope and the knot comes out.
It's normal for cows to shift position while in the milking stall. The slip makes it easy to readjust how "hobbled" Maggie is as the milking progresses. You don't want to make a hobble so short that the cow is immobilized, because she'll panic. It should only be short enough to keep her from kicking over the milk bucket, or kicking the milker (me!).
The very first thing to do before starting to milk (after hobbling, of course) is to wash the udder. For obvious reasons, this is very important. It's not always this bad, but this morning was a doozy.
I use two buckets for milking. I milk directly into the smaller one...
...and then, when I've accumulated an inch of milk or so of milk, I pour it into the larger bucket behind me.
This system serves two purposes. One, if the cow kicks the bucket over, I haven't lost all the milk. And two, the larger bucket is far enough away that if Maggie urinates, nothing splashes into the milk.
When I'm done milking, I cap the clean milk with a bowl cover before I release the animals.
Then it's time for Stormy to get her own breakfast. By the way, to forestall any questions, once-a-day milking means the cow adjusts her output for two "calves" (I'm the other "calf"), so Stormy is not deprived of any of the food or nutrients she needs.
After I come back to the house with the milk, I strain it through a double layer of thin cotton cloth and chill the milk. (I boil the cloth each day to sanitize it.) Then I scrub and sanitize the buckets and upend them to air-dry until the next day.
And that's all there is to it! Ta da!
Is there a reason you use plastic instead of stainless steel buckets?
ReplyDelete- MV
Cost is a factor, but also weight. I am constantly moving the smaller bucket around when milking, making adjustments to Maggie's leg position, etc. This morning, for example, Maggie was a little restless toward the end of the milking, so I did a lot of one-handed milking while holding the bucket up close under her udder with the other hand. That would be impossible with a heavier stainless steel bucket.
Delete- Patrice
Back when I was milking cows as a dairy herdsman I used to apply a nose leed (looks like a pliers with balls on each side with a rope attached) and pull her head to the side or place a rope over the hips and in front of the udder. They make a commercial device with two curved bars that go over the hips with a screw handle to tighten. Rarely had to repeat more than a couple times. I did have a cow that really didn’t want to be milked. With just the nose leed she hooked a hoof in my pants pocket and ripper them off. Had to use both methods and a shot of oxytocin to get her to let her milk down. First calf heifer, we ended up eating her!
ReplyDeleteThank you for this blog! You are doing good work, both on the farm and on the net.
ReplyDeleteHere here. I have been a reader since I was pregnant with my first child. He is now 16! Patrice has given me such an education on preparedness, I now have a garden, a library, I can can, and preserve via dehydrating and now freeze drying. I'm more frugal, cook from scratch and my pantry brings me joy! Thank you Patrice, for being such an inspiration. -KinCa
DeleteAww, thanks! And kudos for your awesome lifestyle!
Delete- Patrice
Stormy is adorable! The fresh cheese and butter will be amazing. Thank you for your thoughtful explanations. We miss you on WND! Mr. Farrah hasn't written since August. He must not be well, again. He certainly would have covered everything Trump with wisdom and glee and gratitude.
ReplyDeleteVery educational! Thank ou very much for answering my question. You have a true heart of a teacher. Thanks again!
ReplyDelete